A division of A division of Ecopower Inc

Aluminum Poles

Round and Square

Ecopower's aluminum poles are constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly is full-length heat treated after base weld to produce a T6 temper.

Spec Sheets

Round Straight Square Straight

Specifications

Standard
drill pattern matrix

Our standard pole includes an injection molded plastic pole cap and is intended to be used with a surface mounted fixture. Drill patterns are measured relative to the hand hole position.

Customers are responsible for engineering analysis and fixture compatibility for all applications. Drill patterns for non-Ecopower LED fixtures must be supplied at time of quote or order.

Pole Cap
Pole cap standard
Custom
Tenon Mount - WELD
Tenon mount - weld diagram
Tenon Mount - SLIP
Tenon mount - slip diagram

For tenon mount applications, specify both tenon diameter (2.375", 2.875", 3.5", 4", etc.) and length (3", 4", 5", 6", etc.).

Ecopower cares about the environment, and to that end we do not produce any NOX or SOX (sulphur oxide, nitrogen oxide) during our powder coating processes. In fact our powder coat coating technician does not need to wear a mask. During our welding process we utilize a state of the art HEPA filtration system that virtually eliminates and hydro carbon release into the atmosphere. We are striving to protect our planet, one pole at a time.
Handhole
Handhole plus cover - round pole

4"-5" Butt Diameters
2" x 4" Handhole with curved Lap Style Aluminum Door and two (2) SS Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4"-20NC hole is provided opposite the Handhole.

6" Butt Diameters
Reinforced, 3" x 5" curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8" diameter hole is provided opposite the Handhole.

7" Butt Diameters
Reinforced, 4" x 6" curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. Reinforced Frame will contain a tapped 3/8"-16NC Grounding Provision.

Handhole plus cover

4"-5" Butt Squares
2" x 4" Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4"-20NC Grounding Provision is provided opposite the Handhole.

6" Butt Square
3" x 5" Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4”-20NC Grounding Provision is provided opposite the Handhole.

Base
Base - round pole

4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers (Alloy 356-F) and Stainless Steel Hex Head Attaching Screws.

Base - square pole

4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Snap-In Bolt Covers.

Anchorage
Anchorage - round pole
Anchorage - square pole

Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55 with ten inches (10”) of threaded end galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.