A division of A division of Ecopower Inc

Steel Poles

Round and Square

Ecopower steel pole shafts are constructed from weldable-grade, cold-rolled, commercial quality carbon steel tubing conforming to ASTM A500 Grade B. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2, CWB & CSA standards.

Spec Sheets

Round Straight Square Straight

Specifications

Standard
drill pattern matrix

Our standard pole includes an injection molded plastic pole cap and is intended to be used with a surface mounted fixture. Drill patterns are measured relative to the hand hole position.

Customers are responsible for engineering analysis and fixture compatibility for all applications. Drill patterns for non-EcoLED fixtures must be supplied at time of quote or order.

Pole Cap
Pole cap standard
Custom
Tenon Mount - WELD
Tenon mount - weld diagram
Tenon Mount - SLIP
Tenon mount - slip diagram

For tenon mount applications, specify both tenon diameter (2.375", 2.875", 3.5", 4", etc.) and length (3", 4", 5", 6", etc.).

Ecopower cares about the environment, and to that end we do not produce any NOX or SOX (sulphur oxide, nitrogen oxide) during our powder coating processes. In fact our powder coat coating technician does not need to wear a mask. During our welding process we utilize a state of the art HEPA filtration system that virtually eliminates and hydro carbon release into the atmosphere. We are striving to protect our planet, one pole at a time.
Handhole
Handhole plus cover - round pole

4"-5" Butt Diameters
2" x 4" Handhole with curved Lap Style Steel Door and two (2) SS Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4"-20NC hole is provided opposite the Handhole.

6" Butt Diameters
Reinforced, 3" x 5" curved Steel Frame with Steel Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8" diameter hole is provided opposite the Handhole.

7" Butt Diameters
Reinforced, 4" x 6" curved Steel Frame with Steel Door and two (2) SS Hex Head Screws. Reinforced Frame will contain a tapped 3/8"-16NC Grounding Provision.

Handhole plus cover

3" x 5" Flat Handhole with Cover, Stainless Steel Screw and Backbar. A Grounding Provision incorporating a tapped 1/2"-13NC hole will be welded to the opposite inside wall.

Base
Base - round pole
Base - square pole

4-Bolt Steel Plate Base Flange of fabricated hot rolled carbon steel conforming to ASTM A36, CSA W47.1/W59 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and attaching hardware. Base Cover will be fabricated from ABS plastic or metal materials.

4-Bolt alignment adjustable steel base plate, includes 4 galvanized J bolts engineered to CSA requirements, and template.

Anchorage
Anchorage - round pole
Anchorage - square pole

Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55 with ten inches (10") of threaded end will be galvanized per ASTM A153 & CSA. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.